Laminar Lip spoiler, Kawasaki Z750S 2005-on

Model/varenr.: LIP-K1171


Monteres hurtigt og enkelt med det medfølgende patenterede Dual Lock velcro fra 3M.

Laminar Lip er et omvendt bæreplan (airfoil), som sørger for at skyde vindturbulenserne 10 til 15 cm længere op end hvis man kører uden en Lip (hos nogle modeller helt op til 20cm længere op).

Med en Lip kan du nu kontrollere luftstrømningen omkring din motorcykel kåbe.

Montagevejledning (kun på engelsk)


Mounting Instructions for K1171


  1. The screws are supplied to replace the four rearmost screws in the windshield.
  2. Place the motorcycle on level ground.
  3. Clean the surfaces where the LIP will be located with the soapy water (not polish).
  4. Gather the necessary tools to remove and replace hardware.
  5. Remove the four rearmost machine screws securing the windshield.
  6. Loosely install the supplied screws and small washers on the outside of the LIP.
  7. Rubber washers should be located between the LIP and the fairing surface. The LIP may need to be opened side to side a bit to align the holes.
  8. Loosely install machine screws in to their respective holes.
  9. Snug down the screws, but do not over tighten.
  10. DO NOT USE THREAD LOCKING ADHESIVES the solvents will craze the plastics.